Skip to main content

Free Vidoes For Industrial Automation

http://freevideolectures.com/Course/2345/Industrial-Automation-and-Control

Comments

Post a Comment

Popular posts from this blog

Nucleonic level transmitter

Process Level Measurement Traditional sensors such as displacers and differential pressure transmitters are making way for new technology and in particular two-wire radar level transmitters. We look at some of the advances in different level technologies and highlight why pulse radar is rapidly becoming the preferred choice for process level measurement. Capacitive / Admittance level transmitters Capacitive level transmitters have been used on a variety of liquid and solid level applications for many years. If the process is understood and does not vary, and if a number of basic rules are followed, then capacitive level sensors can prove to be reliable and cost effective. In the past, applications with very viscous and conductive products have proved to be problematic. However, recent advances such as "phase selective admittance" processing within the transmitter oscillator have allowed automatic compensation for product build-up on the prob...
Post a Comment
Read more

ORBITAL MECHANICS

This Page was followed by the http://www.braeunig.us/space/orbmech.htm  this web portal . I have Read this page that's I have address it. Conic Sections Orbital Elements Types of Orbits Newton's Laws of Motion and Universal Gravitation Uniform Circular Motion Motions of Planets and Satellites Launch of a Space Vehicle Position in an Elliptical Orbit Orbit Perturbations Orbit Maneuvers The Hyperbolic Orbit Orbital mechanics , also called flight mechanics, is the study of the motions of artificial satellites and space vehicles moving under the influence of forces such as gravity, atmospheric drag, thrust, etc. Orbital mechanics is a modern offshoot of celestial mechanics which is the study of the motions of natural celestial bodies such as the moon and planets. The root of orbital mechanics can be traced back to the 17th century when mathematician Isaac Newton (1642-1727) put forward his laws of motion and formulated his law of universal gravitation. The engine...
Post a Comment
Read more

What is the difference between a Single acting and double acting valve?

Normally a control valve is refer to by it's fail position. This means "what position will the valve move to should the supply air or control signal to the valve falls away". This is important to safe guard the process at various places so some valves will be fail open and some fail close. In order to have valve as a fail open or close the valve the actuator have to be spring loaded. So by having the spring on top or bottom of the actuator piston, will determine if it will be a FO or FC valve. This kind of valve is also called single action since it will only have one output from its positioner to either the top or bottom of the actuator. The positioner on the valve is also setup as a single acting positioner since it will only give a single action to the actuator, the reverse action will be done by the spring. The problem with this setup is that it is possible that the process might be so strong or the pressure so high (during a blow down or ESD shutdown in the plant) th...
Post a Comment
Read more